Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am facing with a case where it would be useful to have qinq support on private vlan trunk port. I would have about 10 primary/secondary (isolated) vlan associations. Secondary vlans would be tagged and accessible via pvlan trunk port. So far nothin...
Configuring CFM on 3750ME switch (C3750ME-I5-M, Version 12.2(50)SE )I noticed interworking issues connecting to 3rd party clouds. Does anybody know whether Cisco supports standard or pre-standard version of CFM (802.1ag)?
Hi.Since I am planning certain network I am wondering if following case would work regarding multicast and Q-in-Q: There are 3rd party access devices which perform Q-in-Q on end user traffic. Traffic is further aggregated to Cisco Metro Ethernet netw...
I configured dialin accesss using isdn pri interface. It works fine just for one user. When another user dials in (using same or different local username/password), the previous one loses the connectivity. Actually the statuses seem fine for the prev...
Hi,ip unnumbered ethernet 0/0.1 address is used from other IP subnet already from the beginnig. So it is not part of the dialer's ip pool.Otherwise I also belive that it might be IOS related issue. Anyway, workaround using separate dialer interfaces ...
Hi,"dialer caller" is ok. There is more "dialer caller"s in actual configuration. Both calls (PPP) are correctly terminated. Problem is that first session does not have IP connectivity anymore, when second session is established.
