Hi,
While I am getting Vlan Flapping on LAN network and seeing regular logs on my core switch - 2. I tried to troubleshoot but not able to succeed. Below is the details attached for understanding and support needed. I have attached network diagram a...
Hi,
Wanted to understand if we can changed the default VPC peer link timer from 240 seconds. Situation is when we remove the peer link, secondary switch ports goes to suspended mode and once peer link is connected back it takes almost 4 minutes to g...
Hi,
Could any please let me know if we could use EEM script for capturing running config and send it to FTP server at particular Time/date
We have 200 routers & want to capture running config of all routers at particular time.
Thanks
Hi, I have nexus 2k uplinked with 5k Nexus, When i am trying to connect 10Mb tape library server port, its physically not coming UP, I have tried to harden the port on 2k by setting the speed/duplex/bpdu enabling but still not work...
Hi Mark,
Thanks for the reply and below are my observation and answer to your question.
1. We are running PVST and Access SW 1 and 2 are connected to Hub below and have uploaded diagram in which you will get more clarity.
2. Yes, SW1 has 2 uplinks...
Hi Reza,
Currently there are 2 peer links and requirement is that when both the peer links goes down the secondary switch port goes suspended state and once when we connect back the peer link, secondary switch ports takes almost 4 min to come to nor...
Hi,
Could you please let know option on Cisco prime 2.1 to configure NTP IP address, Prime should sync with my Ciso core switch which is configured as NTP master.
Thanks