Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,after a years of rock solid switching we are looking for to replace our old Cat 4506E, 4506RE, 4503E switches.The main problem is that we are running out from 10 gig ports. And the 10G ports are aggregated (3 port per 12G group) that is proble...
Hi all, we are looking for replace our Mikrotik routers to something more rock solid.We are running Routing, NAT, Traffic Shaping and firewalling (or static ARP), DHCP and PPPoE concentrator on mikrotiks now. Is there any cisco HW based solution that...
Hi all,
can anyone explain for what is used a Port pair? I found this function in our CISCO DCM GBE Card.
Manual says that port pair means 2 physical interfaces working as one virtual. Ok but how it is workig?
What if i have 2 gbe ports in port p...
I tryed to replace my SAS disks in Cisco UCS C420M3 but the performance is quite poor in Vspehere 6.5 also in any raid... Tryed raid 10,5,1.
From that reason i am thinking about SSD disk to PCIe slot.
That i am thinking about
2x Kingston KC1000 96...
Hello,
how can i show slot usage on 4500e switches? For eg. 4500e have 48 Gb/s capacity on slot. How can i check actual slot bandwidth usage?
Thank you.
Dave
I have 3600 customers on 66 public IPs. In this case it should be anough to have pap 60 with by default 1024 ports. That should be really anough... so idk whe should be the problem
I applyed timeouts from link you shared and also added bpa to the end of the line in config.But this errors are still rising every minute:In-to-out drops: 904684907 Out-to-in drops: 426159528Interesting thing ist that after i made this changes the ac...
Here it is:ip nat settings mode cgn
no ip nat settings support mapping outside
ip nat settings pap limit 60
ip nat settings nonpatdrop
ip nat log translations syslog
ip nat translation max-entries 2147483647
ip nat translation max-entries all-host 50...
Everything look ok.
Can you explain what is mean STP: VLAN0099 heard root ?
And why am I receiving on one sw 20 log messages /sec with this message?
Thank you
