Hi,
ist this a normal behaviour or is it possible to override this limitation of 10 prepends:
BGP-Router(config-route-map)#set as-path prepend XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX% Cannot have more than 10 as-paths prepended
My ...
Hi,one question regarding the oir feature on cat6500. I've found this information about that feature:Caution: When a module is inserted or removed, the switching bus can sometimes stall for about 3 seconds. This can disrupt the adjacencies in protoco...
Hello,from time to time we are experiencing high cpu-load. I try to find out who is responsible for that load and i've found that example of an eem-script:event manager applet high_cpu_load event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.3.1 get-type exac...
Hi,is there any restriction about the distance between a fex and its 5548UP parent switch? The N2K-C2248TP-E-1GE is able to support the following SFP's:SFP-10G-SRSFP-10G-LRFET-10G2SFP-10G-ER SFP-H10GB-CU1MSFP-H10GB-CU3MSFP-H10GB-CU5MSFP-H10GB-ACU7MSF...
If there is a N55-D160L3-V2 installed, enable the feature netflow a try to activate a collector, exporter and monitor. Without the L3-daughter card it makes no sense. Regards,Stephan
Hi Joseph,that ist the output i get: namespace import ::cisco::eem::*namespace import ::cisco::lib::*array set arr_einfo [event_reqinfo]if [catch {cli_open} result] { error $result $errorInfo} else { array set cli1 $result}action_syslog msg "Hi...
Thanks Matt and Reza,we are planning to provide 30 vrf, so that is a good reason to use one ospf process with multiple vrf, unless there is also a limitation...:-(THX