Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I was in the process for preparing for a nxos upgrade on a Nexus 3048 and ran the following:switch(boot)# init system I forgot to add the: check-filesystemat the end of the command.Now my loader looks like this:loader> show sysconf79 2 2 0 7 3 18 e72...
Curious what is going on. Nexus not seeming to be able to load new compact bin from bootflash.>>>>> Here is the system:sp1b# sh verCisco Nexus Operating System (NX-OS) SoftwareTAC support: http://www.cisco.com/tacDocuments: http://www.cisco.com/en/U...
Hi All,
Having trouble getting two way ESP IPSec IKEv2 L2L tunnel between 5506 and SRX 4200
I have the configs from both sides and everything appears to match.
It appears I have a functional tunnel based on the output of "sh crypto ikev2 sa" and "s...
Hi All,
I'd like to know if anyone has experience using the Windows built-it / native IKEv2 option to establish a remote access VPN connection with an ASA.
I know I am using general terms here and not being specific. Perhaps it only works with Wind...
Hi Guys,
I hope someone can help me with this, as I guess it is a fairly common operation.
I want to (using screen or putty or securecrt) connect to the serial console of XRv running in VMware Workstation 12 running on Ubuntu 16.04.
I've done it...
Since this was not resolved, I had to get a third 3048. So, since I now have a working pair of 3048s with 9.2(4) for VPC and layer 3 subinterface portchannels, this particular nexus, with failing set after an INIT is open for experimentation. Stay t...
Another switch I used the following process successfully:1. Break into loader>2. set IP on mgmt03. connect tftp server to mgmt04. from loader> TFTP boot a kickstart to get to switch(boot)#e.g.loader> boot tftp://198.18.225.68/n3000-uk9-kickstart.6.0....
Hi BB,The commands I issued are here:loader> dirbootflash:lost+foundloader>loader> set ip abcdloader> set ip 1234loader>The problem appears to me that the set command is not working because it no longer recognizes bad input.When I configure the mgmt0...
I still have open questions. Why is the Nexus 3048 that had an INIT, behaving this way?loader> dirbootflash:lost+foundloader>loader> set ip abcdloader> set ip 1234loader>How can I get "set" back so I can tftp boot from a kickstart?What will happen if...
The questions are:1. Why does bootflash look like this and is this why the set command in loader appears to be broken?loader> dirbootflash:lost+foundloader>loader> set ip abcdloader> set ip 1234loader>2. Is there a way to get the set command working...
