Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Paolo Moserle
Stats
Member since
02-14-2010
21
Posts
0
Helpful
0
Solutions
Created by
Paolo Moserle
in Small Business Switches
in Small Business Switches
04-24-2019
05:44 AM
04-24-2019
05:44 AM
Please add this command !
... View more
11-18-2014
09:41 AM
Really annoying problem. The only thing that I can suggest you, is to try with a different gateway, like a patton, in front of the router.
... View more
11-18-2014
09:24 AM
Hi Giovanni, this is my configuration: voice-port 0/1/1 trunk-group ALL_FXO 64 supervisory disconnect dualtone mid-call supervisory custom-cptone IT-CUSTOM supervisory dualtone-detect-params 1 no battery-reversal input gain 14 cptone IT timeouts call-disconnect 2 timeouts wait-release 2 connection plar opx 400 impedance complex2 description * FISSO * caller-id enable Some times the error still occurs, I suggest you to switch the number in a sip trunk. In my experiences I find many problems to configure FXO in Italy, where in other country there are not!
... View more
04-09-2014
01:47 AM
Many thanks kenrandrews, your answer is very useful. I fully agree with you about the "strange redundancy problem", but in this project there are some factor that are very difficult to explain now. Have you got some opinion about Dmvpn ?
... View more
Created by
Paolo Moserle
in VPN and AnyConnect
in VPN and AnyConnect
04-08-2014
09:50 AM
04-08-2014
09:50 AM
Hi ! I have a question about a design solution. I need to create a redundancy solution, with HQ and more that 30 branch office. The HQ have 3 connectivity with 3 ISP, these connectivity terminated in the providers's routers and then, they are connected to different isolated vlans that share the connection between two our router. So I want to create a connection between HQ and Branchs, with vpn Gre tunnel and with Eigrp routing protocol. In the HQ environment, I need to use HSRP in the Lan side, so the Ip of R1 is 192.168.100.1, ip of R2 is 192.168.100.2 and the Vip is100.3. Thats is right, so the question is: For the Wans side, can I use the HSRP solutions ? Or i need to use two different tunnel for each router on R3 router ( two tunnel for R1 and two tunnel for R2)? I can take in consideration the Dmvpn, but I want to be able to select a different destinations tunnel for the Branch routers, for example Branch 1 should connect to R1 ISPA end R2 ISPC and Branch 2 should connect to R1 ISPB and R2 ISPA. I think this is not simple in the Dmvpn scenario. I attached the topology.
... View more
Labels:
04-19-2013
04:42 AM
I have a similar question: I try to place a call whit jabber client on iPhone, I select a contact from my conctact list, that have a prefix +39, so my default digit to place a call is 0. Is there a way to intercept che call from jabber and translate that from "+" to "000" ? Thanks
... View more
03-06-2013
07:34 AM
Hi, I'have an Uc560 whit a BRI interfaces. E verything was working properly until I updated (8.6.1), since that time, it happens that in some calls, the caller can not hear anything, instead I feel him. What kind of debugging you advise me to do? Thanks
... View more
Labels:
Created by
Paolo Moserle
in Voice Systems
in Voice Systems
09-27-2012
09:30 AM
09-27-2012
09:30 AM
This is the magical paramenter : ! voice class dualtone-detect-params 1 freq-max-deviation 50 ! voice-port 0/1/0 supervisory disconnect dualtone mid-call supervisory custom-cptone IT-CUSTOM supervisory dualtone-detect-params 1 ! Im realy realy happy ! Maybe the CUE manipulates this frequence in some way.
... View more
Created by
Paolo Moserle
in Voice Systems
in Voice Systems
09-27-2012
08:51 AM
09-27-2012
08:51 AM
I have some news. I have tried with a gateway fxo Linksys SPA 3102 connected via Sip to UC560. If I change the parameter of Disconnect Tone in : Whit gateway everything work fine ! This parameter is corresponding to configuration of the FXO integrated in the UC560: voice class custom-cptone IT-CUSTOM dualtone disconnect frequency 425 cadence 200 200 ! voice-port 0/1/0 trunk-group ALL_FXO 64 supervisory disconnect dualtone mid-call supervisory custom-cptone IT-CUSTOM input gain 14 cptone IT timeouts call-disconnect 2 timeouts wait-release 2 connection plar opx 396 impedance complex2 caller-id enable ! But not working ! Where is the problem !?!?
... View more
Created by
Paolo Moserle
in Voice Systems
in Voice Systems
09-27-2012
08:30 AM
09-27-2012
08:30 AM
I have this problem only when the call is passed to CUE and this redirect the call ( for example press 1 for Sales). This is a strange problem in the cue setting.
... View more
Created by
Paolo Moserle
in Voice Systems
in Voice Systems
09-27-2012
12:29 AM
09-27-2012
12:29 AM
I have the last version, 8.6. I noticed this problem happens when CUE is involved in to the call. Is maybe a autoattendant script problem ?
... View more
Created by
Paolo Moserle
in Voice Systems
in Voice Systems
09-26-2012
10:32 AM
09-26-2012
10:32 AM
Thanks for replay Paolo, and for paramiters but still not working. I noticed that isdn is better but in this case the only solutions is fxo. Another old pbx (not cisco) work without problems! Sent from Cisco Technical Support iPhone App
... View more
Created by
Paolo Moserle
in Voice Systems
in Voice Systems
09-26-2012
07:32 AM
09-26-2012
07:32 AM
Hello Paolo, I want to explane better ma issue: I have a simple configuration with a provide (telecom italia) direct connect to FXO. I noticed that when i choose to redirecting incomming call to a Iphone, and I bring down the call (for example from my cel phone), evrything works fine. Instead when I redirect a incomming call to the Cue (for a AVR simple menu) and this works redirecting call to iphone, and from my cel bring down the call, the iphone still ring and after the No aswer timeout the call was passed again to cue for voicemail. This is my configuration of FXO voice class custom-cptone IT-CUSTOM dualtone disconnect frequency 425 cadence 400 350 225 525 ! voice-port 0/1/0 trunk-group ALL_FXO 64 supervisory disconnect dualtone mid-call supervisory custom-cptone IT-CUSTOM input gain 14 cptone IT timeouts call-disconnect 2 timeouts wait-release 2 connection plar opx 396 impedance complex2 caller-id enable ! Thanks
... View more
11-18-2014
Really annoying problem. The only thing that I can suggest you, is to
try with a different gateway, ...
11-18-2014
Hi Giovanni, this is my configuration:voice-port 0/1/1 trunk-group
ALL_FXO 64 supervisory disconnect...
04-09-2014
Many thanks kenrandrews, your answer is very useful.I fully agree with
you about the "strange redund...
04-08-2014
Hi !I have a question about a design solution. I need to create a
redundancy solution, with HQ and m...
04-19-2013
I have a similar question:I try to place a call whit jabber client on
iPhone, I select a contact fro...
03-06-2013
Hi, I'have an Uc560 whit a BRI interfaces. Everything was working
properly until I updated (8.6.1), ...
Created by
Paolo Moserle
in Voice Systems
09-27-2012
09-27-2012
This is the magical paramenter :!voice class dualtone-detect-params 1
freq-max-deviation 50!voice-po...
Created by
Paolo Moserle
in Voice Systems
09-27-2012
09-27-2012
I have some news.I have tried with a gateway fxo Linksys SPA 3102
connected via Sip to UC560.If I ch...
Created by
Paolo Moserle
in Voice Systems
09-27-2012
09-27-2012
I have this problem only when the call is passed to CUE and this
redirect the call ( for example pre...
Created by
Paolo Moserle
in Voice Systems
09-27-2012
09-27-2012
I have the last version, 8.6. I noticed this problem happens when CUE is
involved in to the call. Is...
Created by
Paolo Moserle
in Voice Systems
09-26-2012
09-26-2012
Thanks for replay Paolo, and for paramiters but still not working.I
noticed that isdn is better but ...
Public Statistics
| Date Registered | 02-14-2010 08:45 AM |
| Date Last Visited | 05-01-2019 05:45 AM |
| Total Messages Posted | 21 |
