Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We're having trouble applying the combination of WCCP redirection of Citrix traffic to a Citrix Cloudbridge WAN accelerator appliance, and applying Policy/Class to protect a few Mbits of Citrix traffic outbound via the WAN interface.
We originally w...
We have an E1 Frame Relay connection at our head-end site, with 2 remote sites at 512K each. We have been using a sub-interface with one PVC, and with WFQ and FRTS applied per remote site. The overall serial link has had no WFQ; just FIFO. We've s...
Has anyone come across WAV files that depict VoIP calls matched to various MOS values? I want to be able to play the files to demonstrate the call quality levels. I know that MOS=4 is good, and MOS=3.2 is less-good. I can't tell whether either of...
Does a route-map statement that indicates set next-hop 1.2.3.4 know how to gracefully handle an outage of that router? Will the general routing table be used instead of the policy? I don't see a way to accomplish the following:1. If available, use...
Does anyone have recommendations for positioning Access Points (we have 340's) for best throughput and simultaneously best area coverage for our laptops in a one-story building. I'm getting only about 2.8-3.3 Mbits/sec real TCP throughput (with 128 b...
Thanks for thinking through on this for us.
We we really need the WAN router to have the class/queue protection. The WAN queue is where the competition / contention is felt. Other traffic that flows across the WAN needs the mix of classes defined/e...
Config - this works fine on 4331 router in the lab. Trouble on ASR 1002 in Production.
! Global wccp statements
ip wccp check services allip wccp 62 redirect-list WCCP-CIFSip wccp 72 redirect-list WCCP-Citrix
! Policy elements
class-map match-any ...
We have had the group/AAA override working with WLC5508 since code version 7.2, with ACS 5.3 as our RADIUS server. We haven't yet run 7.6 code, but expect to in July. Our ACS is now up at 5.5. The earlier post where I mentioned the WLC 5760.... t...
I have heard that the IOS implementation of WLC features is lagging on the 5760 vs 5500. Not full parity with 7.x.We, too, need Interface Group to work. We have Ancient WISMs that we intend to replace with 5760's. Have to wait....Right now we can't r...
We have Frame Relay traffic shaping configured on each of the sub-interfaces. It's their sum that I'm wrestling with on the 'parent' interface.I didn't think you could apply a 2nd layer of 'fancy queueing' for the whole interface.Richard
