Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have an issue with AP 2702e-UXK9 failing to register on the controller 5760 version ct5760-ipservicesk9.SPA.03.06.10.E.152-2.E10 Here are some logs:[12/18/20 12:02:26.708 GTM 5f0 8513] 00f2.8b02.38b8 Discovery apType = 0, apModel = AIR-AP270...
hi there,I have a Cisco WISM2 installed on Cisco cat 6509, with 39 indoor (3502i) and 14 outdoor (1310G) Access point,so the problem i am facing is that, the controller recognizes all AP and they are all configured and working well, then the signal o...
OK let check how to do that, but for mean time this is the information i get from the wireless scanner when standing at 3meters from the AP:SSID :WIFI-STAFF -57 dbm Channel 1 fréquence 2412another detail: on the ...
Hi,antennas are integrated in the access point, i wanted to use the 1310 for covering the all campus, by putting them ouside and gatting the signal en houses around the campus, that avoids me put an AP inavery sigle houses and for people seating out....
