Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have few 5508 controlers with 7.0.116.0 version and i decided to upgrade to 7.4. I did an upgrade of software and FUS (AIR-CT5500-K9-1-7-0-0-FUS.aes) on three of them without any problems. But on the last one i cannot upgrade fus image.. I dowl...
Hi there, I was asked to performe upgrade from acs 5.3 to 5.4 (vm), but i noticed that someone installed it on 80gb partition and there is 500gb as one of the requriments in upgrade and install procedure. What is strange to me is that "dir disk:" com...
Hi.Is it possible to send profile name as an Radius atribute during client authentication? I would like to match users depends on profile name to sperate Identity Stores in my ACS.ASA 5540 8.4, anyconnect 3.1.01065, ACS 5.1thanks.
Hi.I have few APs working in hreap mode as local switching. I have Guest WLAN and after connection to that WLAN client must accept security regulations. The problem is that on WLC under Security->Web Auth -> Web login page I put text saying:"Read a ...
Hi there.I trying to resolve a problem with VPN connection. We use ASA 5540, anyconnect ver. 3.1.0.1065 which works fine for almost every workstations. But some of them after successful authentication crash with error attached below:"the client agent...
Amjad, It's excat same file Scott, I will try to connect via console and let You know. Is there any explaination for such behavior that some controllers install FUS automaticlly and some wait for "y"?
As Cadet said, you should use IP SLA feature. IP SLA:http://www.cisco.com/en/US/docs/ios/12_4/ip_sla/configuration/guide/hsicmp.htmlAnd here is how to connect it to default route:http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dba...
Strange thing. When i set my ACL for permit any any, i am not redirected to local auth page on my WLC after putting some adress in web browser. Whats worse the web page which i am trying to reach doesn't show up either. I have no idea what is going o...
