About zahir_zahir

zahir_zahir · 04-22-2013

Hi, I have few 5508 controlers with 7.0.116.0 version and i decided to upgrade to 7.4. I did an upgrade of software and FUS (AIR-CT5500-K9-1-7-0-0-FUS.aes) on three of them without any problems. But on the last one i cannot upgrade fus image.. I dowl...

zahir_zahir · 04-09-2013

Hi there, I was asked to performe upgrade from acs 5.3 to 5.4 (vm), but i noticed that someone installed it on 80gb partition and there is 500gb as one of the requriments in upgrade and install procedure. What is strange to me is that "dir disk:" com...

Anyconnect profile as Radius atribiute · 11-26-2012

Hi.Is it possible to send profile name as an Radius atribute during client authentication? I would like to match users depends on profile name to sperate Identity Stores in my ACS.ASA 5540 8.4, anyconnect 3.1.01065, ACS 5.1thanks.

zahir_zahir · 11-09-2012

Hi.I have few APs working in hreap mode as local switching. I have Guest WLAN and after connection to that WLAN client must accept security regulations. The problem is that on WLC under Security->Web Auth -> Web login page I put text saying:"Read a ...

zahir_zahir · 10-30-2012

Hi there.I trying to resolve a problem with VPN connection. We use ASA 5540, anyconnect ver. 3.1.0.1065 which works fine for almost every workstations. But some of them after successful authentication crash with error attached below:"the client agent...

zahir_zahir · 04-25-2013

It worked! Thanks!

zahir_zahir · 04-24-2013

Amjad, It's excat same file Scott, I will try to connect via console and let You know. Is there any explaination for such behavior that some controllers install FUS automaticlly and some wait for "y"?

Anyconnect profile as Radius atribiute · 11-27-2012

Dont know how i couldnt find that earlier:https://supportforums.cisco.com/thread/2102448

zahir_zahir · 11-27-2012

As Cadet said, you should use IP SLA feature. IP SLA:http://www.cisco.com/en/US/docs/ios/12_4/ip_sla/configuration/guide/hsicmp.htmlAnd here is how to connect it to default route:http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dba...

zahir_zahir · 11-13-2012

Strange thing. When i set my ACL for permit any any, i am not redirected to local auth page on my WLC after putting some adress in web browser. Whats worse the web page which i am trying to reach doesn't show up either. I have no idea what is going o...

Member Since	‎03-04-2012 04:21 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	26
Total Helpful Votes Received	5

User Statistics

User Activity

WLC 5508 Fus upgrade

ACS 5.3 change disk size

Anyconnect profile as Radius atribiute

H-Reap PreAuthentication ACL

Anyconnect 3.1.0.1065 "the client agent has encountered an error"

WLC 5508 Fus upgrade

Re: WLC 5508 Fus upgrade

Anyconnect profile as Radius atribiute

IP SLA active/active scenario

Re: H-Reap PreAuthentication ACL