Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am able to access CIMC during boot-up via F8 and perform basic settings (NIC mode, IP address, etc. -- See attached screencap). However once I save the configuration and let ESXi boot, I cannot access the CIMC Web GUI. I just get a generic "Can't r...
My client is reporting that customer calls are being forwarded to his cell phone from the company phone system. He describes what he believes to be the process as follows:1. Customers call the company's main number which is associated with a Unified ...
We are using a Cisco 3005 VPN Concentrator to handle all of our client connections. At present, split-tunneling is permitted, so remote hosts access the Internet via their own ISP. However, I have been tasked with setting up an alternate VPN profile ...
When I think of QoS, I typically picture it being used in conjunction with a WAN technology that supports queuing such as MPLS. The benefit in such a scenario seems clear in that the provider maintains traffic prioritization across the WAN. Having sa...
Jaime and minkdennis,Thanks for your input. Subsequent to my original post I discovered a that in fact the original UCCX application was relaying the call to yet another UCCX application. So the actually flow was as follows:1. Customers call the comp...
Sorry to jump in on an old post, but I'm hoping one of you can answer a related question.Based on the discussion, I'd like to use 6.0.199.4 as my Emergency Image, however I don't see an "ER" version of the software image on CCO. I see one for 5.2.x a...
Ok, so let's say you are using a fully meshed WAN topology with no provider queuing. You configure QoS queues on all of the edge routers. Voice and other important data are given higher priority as they leave the LAN and enter the WAN cloud, but once...
