Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi folks,If someone could clarify my configuration here for an ISATAP tunnel on a 2811 Router, directly connected to a Windows XP machine (LAB Environment). I have sourced the tunnel to the FA0/0 of the Router and applied a route on the Window XP Cli...
I have 2 4506E sup2+ connected with a number of vlans configured for HSRP. I changed to of the vlans subnet masks, verified the configuration on both, and now i cant ping the HSRP VIP address on both of these vlans. When tracing & Showing ip route, t...
Hi ,Can you tell me if a 6506 Sup32 is capable to route IPV6 using EIGRP? (Is this a code issue?Also is a 4506 VI capable of routing IPV6 using EIGRP?Thanks in advance
Hi folks,I'm having issues with our Anchor controller here running 3.2.171.6. Using a chain certificate for our Web authentication re-direct Page to a WEB-server. sometimes the Guest Clients are not re-directed to the WEb authentication page. After I...
I need to know if there is a debug command to trouble shoot Web Authentication Certificate Issue for Guest Access. I'm currently troubleshooting an issue to verify if our Anchor controller is passing redirects to our web Server. Any advise would be a...
The 4506 switch sup + 2 only supports stub eigrp. The preferred option was to upgrade to full EIGRP. The stub command can stay, but I cleared the ip eigrp neighbors on the 4506 , which had resolved the loop issue. but I have to put a static on the Ga...
Both vlan interface are showing as UP UP ,even though the EIGRP logs specify the vlans are down.SW1interface Vlan4 ip address 152.62.76.66 255.255.255.192 standby ip 152.62.76.65 standby preempt!interface Vlan5 description Prod_servers ip address 152...
I have verified the HSRP is still in the subnet. and routes and helpers.The EIGRP is a stub with no auto-summarize, the subnet is subnetting down to 6 vlans. but I have it advertised as a full /24. the EIGRP protocol keep trying to establish new adja...
No issues with the DNS resolution. it may be an issue with the SSL certificate. root CA. I'm using code 3.2.171.6 as we need to use this for ipsec vpn module. After a quick reboot , everything goes back to normal. thanks for the advise
