Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How do get tftp a file from rommon?It will transfer a file from TFTP to the switch but it doesn't boot to the file and the file never is written to bootflash.rommon 2 > boot cat4000.4-5-11.bin0:29.333282: Loading file 192.168.1.198:cat4000.4-5-11.bin...
I've try setting up the pix 501 with the ezvpn to the 3005 but kept getting a no acceptable IKE SA on the concentrator. The samples shows the pix 501 with only vpnclient statements as show below: vpnclient vpngroup hwclient password <password> vpn...
so without a NAM blade i'm stuck with mini-rmon which doesn't show automatically show a top talker. It looks like it only show one port at a time and you would have to manually compare them to other ports.
Herein lies the problem.I issue the command boot cat4000.4-5.11.bin.I see the request from the catalyst 4000 ip address to send the file via tftp.I see the tftp server transfer the file.The catalyst 4000 reboots.When it reboots it comes back to rommo...
Yes i tried the boot statement with both bootflash: and tftp:. I am using the MGMT port and TFTPing the file. I can see the file being pulled fromt he tftp server but it nevers boots. It also doesn't copy the file to bootflash.rommon 27 > boot cat...
i had this same problem when using Terrapin FTP server and i used Microsoft FTP and it worked fine. In the Device manager manual for version 3.1 there is a list of supported ftp web servers too.
I'm using 7.0 of AOL and 3.5.1 of VPN client. I can attach very small files but Whenever i try to attach larger files AOL hangs. I only had the vpn client installed but not running. When i un-installed the VPN client the attachments started workin...
