About etieseler

etieseler · 05-31-2017

I have two sites with a ASA5505 at one end and a 5525X at the other end. We recently migrated our IP Address space to a new /24. After doing this I cannot get the site to site VPN tunnel up. I get the following output from debug crypto isakmp: Remov...

etieseler · 04-03-2017

I have been building a DR location across the country from our primary site. At the DR side we have a pair of ASAs in HA mode. We have our normal IP Space advertised out of both data centers using BGP, with the DR location being more 'Expensive' so t...

etieseler · 10-30-2014

So I have an older 4510r switch with the SUP-V 10GE sups. It is running (cat4500-ENTSERVICESK9-M), Version 15.0(2)SG7, RELEASE SOFTWARE (fc2) software.From everything I read this supports the 4-Byte ASN, however when I try to configure it my maximum ...

etieseler · 06-01-2017

That got us up and running! I changed Encryption and Hash based on something I read about the license and IOS I have on the 5505 possibly not supporting sha, and I must have changed the authentication along the way some where. Thanks!

etieseler · 06-01-2017

First, I want to say I opened a ticket with TAC as well, they looked over it and said the configs look good and it should work (But maybe something was overlooked), but they think that something is "stuck" where the old IP Address for the local peer ...

etieseler · 04-04-2017

Using a different Context may work, I will look into that, if so that would solve the need. I am not doing any NAT'ing on the router in front of the ASA's. I think using a separate context for a "management" interface would be the cleanest. I moved ...

Member Since	‎10-03-2007 08:16 AM
Date Last Visited	‎10-07-2017 03:54 PM
Posts	6

User Statistics

User Activity

Site to Site VPN not working

ASA at a DR location - a permanent interface to login to the ASDM.

4-Byte ASN on 4510r

That got us up and running! I

First, I want to say I opened

Using a different Context may