Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Last night I attempted to update the unity TSP to 6.0b to allow us to upgrade CallManager to 3.2... This didn't work - Unity would drop calls as soon as it answered them.I then tried 7.0, this had the same problem, and I was unable to get back to the...
We have a need to modify a translation pattern twice a week (to give a different weekend service) - i.e. change a pattern to go to one extension weekdays, and another weekends... I'd like to automate this, and I've found where the patterns are stored...
Dual-line is specified when you create you ephone-dn, and allows you to use tranfers/call waiting etc... you specify it when you create the dn e.g:ephone-dn 1 dual-linenumber xxxand so on..Then assign it to the ephone as before.RegardsAaron
Another thing to check on this is the release notes! I had some problems last week with a similar setup, you will have problems if you don't run the same major version of the OS on both ends (i.e. 6.3). Without this you get all sorts of strange confu...
Do you really need to use MGCP? We've used VG200s for a couple of years now for both fax machines and to terminate our ISDN30s. I've tried MGCP with faxes about 6 months or so ago with little or no success.The best setup we've found with these device...
Sounds more like the problem is with name resolution than blocked ports etc - you mention you can ping IPs or use LMHOSTS to resolve names, however are you adding PDC records to LMHOSTS? If not you may have logon issues like this... Try setting up WI...
Not really - this was a gripe we had with the system when our Cisco supplier convinced us it would, and it came to prototyping and it was obvious that it couldn't, and that they didn't have a clue what they were doing....In the end, we had to buy 796...
