Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,in my lab Back to back with 2801 IOS ver 12.4(24)T1 and two card HWIC-2T the following tests were doing:*when i use the CAB-SS-X21MT and CAB-SS-X21FC cables Result: the highest clock rate that can be supported is 1000000 and lower *when i use CAB-...
Hiin my LAN i have two 4503(distribution) and 10 switch (access).I applied this VACL on two 4500.This was worked well.vlan access-map Guest-wifi 10 action drop match ip address deny-guest-wifivlan access-map Guest-wifi 20 action forward!vlan filter G...
hi,my router connect in inside I have other subnet to reach Behind my Router (add 172.20.1.250) and i can ping to any subnet in outsidebut not Behind my router but if i ping from my PIX it's Successful toward all subnetI am connected in inside and m...
Hi thanks for replyBut i want know how VACL take effect in switch access when two users 172.24.22.10 and 172.24.22.11 Want to communicate without passing by distribution nodes.
thanks for your help,but why should not have a DG of the PIX if you have a layer 3 routing device in your network?I already test your suggest it's working fine.yhanks
