Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys, I have two questions about ASA and VPN. When I use Anyconnect with the IPSec option, this would consume SSL license available on the ASA? (I have an AnyConnect Mobile Essential License)How do I confirm in the ASA FW, that the IPSEC is active...
Hi all,My name is Gonzalo, and I have two little problems with a configuration in my office.I have One Wan link from my ISP directly connected to a 2911 Router for internet with the IP address (190.104.197.90 my side - 89 the ISP side)We have interna...
Hy Guys, I have one router 2911 with the following imagec2900-universalk9-mz.SPA.151-4.M4.binI have two IPS on this routers and I tried to configure the IP SLA on this and I`m not able to do it and I don´t know why.I can configure almost everything b...
Hi guys, sorry for bother you, but I need some help.Today my Call Manager Server fall down, so i`m running with a survival mode in a Cisco 3725 Router with Version 12.3(11) software.In this router I have the E1 isdn with 30 channels to send and recei...
Hi, I have an AP 1141N-A-K9, from autonomous system, with this IOS ( c1140-k9w7-mx.124-21a.JA1), and a WLC 5508 with Version 7.XI want to convert this AP to ligthway to use with this controller.I download de Version of IOS (c1140-rcvk9w8-tar.124-21a....
thanks Jernej for your answer,mm the domain is outside the netwokr and it´s redirected to 190.104.197.90 and I have in the router a inside nat to translate to the server where is the page allocated.there is no posibility to rute this for the IP addre...
Hi John, thanks for your answer, this is the chart.Technology Package License Information for Module:'c2900'-----------------------------------------------------------------Technology Technology-package Technology-package Cu...
Great, thanks,I think that works now, I saw in the debug that is machting with another dial peer, so I add the destination pattern in the new dial peer and it`s seems to work, (i`m doing the config remotly, I`ll test in the office tomorrow morning) i...
Hi Josh, Thank you so much for your answer,I configured like you say and still have the problem that cannot reach any phone, called from outside.I tested the configuration and looks fine but something is missingrouter#test voice translation-rule 1 13...
