Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello team!Is it possible that the SFP-10G-LR will work with multimode fiber?I totaly understand that this actualy depends on cable type and lenght, but I do not have this information right now.So, if someone have succes or bad story I am happy to li...
Hi all!I have NME-AIR-WLC12-K9 software version 5.2.178 and LAP1131AG software version 12.4(18a) access points in my wireless network .I see that APs sent once a minute gratious ARP packets, so in my IPS trigered signature "ARP reply to broadcast"...
Hi!I need to create a user account having a read access to Cisco devices (such as Catalyst, routers, etc) but this user must also have an access to perform administrative tasks for Cisco Works (such as user add, device add and so on)How can I do this...
Hello,As Giuseppe wrote you can't influence to trafic from the Internet toward you LAN if you have only one external ip addres.Only you can do is to police trafic from LAN toward the Internet. And as I understand you need the feature like aggregate p...
Hello,You need only two simple static route with ip sla tracking. You can monitor your ISP state with pinging of 8.8.8.8 or other outside host.Here is the example of configuration http://docwiki.cisco.com/wiki/IP_SLA_Tracking_with_Configuration_Examp...
Hi,If I correct understand your network topology, you can use conditional advertisement for injecting BGP route toward your second DC ISP.http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094309.shtmlWhat IGP do you us...
It works because two things happens:
First, the router who has static route pointing to the interface sends ARP request for every packet with unknown destination.
Second, the
ip proxy-arp
command is enabled by default in routers. When router gets t...
