Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
OK, I have been doing my home work but you gurus out there might be helpful with a questions I have:Here is my basic network layout for multicasting for Syn-appsMulticast Source-->3750 SW (add PIM SM-DM? Yes/No)-->3845 WAN Router (add PIM SM-DM? Yes/...
Syn-apps: PIMv1 or PIMv2 (DM or SM or BSR?) We just pruchased the syn-apps paging software that links into the CUCM and it is clogging our WAN links. We need to set up multicasting with PIM and do not know if we need to use PIMv1 or PIMv2, what is re...
all 15 of my routers and all assocuated routes are configured as static. We now need to implement Multicast routing. Can this be done without a routing protocol? All but two routers connect by T1s in a hub and spoke fashion.Your thoughts?
These communities are frustrating! Always one response but never a response to a follow-up question.OK, here is my question:We have TMS and we need to have our codecs access it. The codecs themselves will have support and maintenance.***What are all ...
Thanks for replying so quickly...Ip Routing is not enabled The switch is currently an access switch for PCs and IP Phones...is there any advantage to enabling L3 services on the switch? Such as enabling Multicast PIM.
Fantastic!I am looking for just licensing answers, sorry. I have heard that there are two parts of the licensing to get a codec connected to TMS. 1) a device access license for the connection to TMS and 2) Support and Maintenance of #1I have also h...
Thank you Magnus,Do you know if we still need the "service and support" licenses for the 25 device access licenses?Bill BranchNorth Country HealthCareDirector of Information TechnologyO: 928.774.8254C: 928.607.9746
