Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
At the moment we are doing EAP-TLS with machine based certificate authentication. As such in ISE radius live logs we see the machine name. There is a requirement to do user based firewall policies on Palo Alto with the radius log information passed f...
Just as the title says, does ISE (version 2.6) in a dedicated deployment (separate admin, separate monitoring, separate PSN) support nodes running both PSN and pxGrid function on a single node? Or does pxgrid service have to be on its on separate nod...
If I have existing AnyConnect Premium licenses, I shouldn't need any requirement to upgrade these licenses if I want to use authentication/authorization of VPN users (via ASA) with ISE? So basic dot1x using PAP_ASCII will work on anyconnect premium l...
Hi Cisco Community, My name is Luca and I am working on an outdoor wireless / IoT project. For this project, we are using Cisco 1572 EAC, Cisco IXM and Cisco vWLC. Here is the scenario. Each IXM will be plugged in the 1572 and each MAP will be formin...
ISE 2.3 patch 5
I am trying to do posturing of wireless connection using the anyconnect posture module, but trying to understand how the process actually works. I have AP in flexconnect local switching mode. I read ISE Posture Style Comparison for ...
Hi @Arne Bier, I wasn't aware of EasyConnect, but definitely something that would work for us as an alternative. Thanks for the suggestion! Yeah didn't plan on trying with the windows supplicant.
Hi @poongarg thanks for your reply. I am a bit confused as ISE Performance & Scale guide states 4 pxGrid nodes supported in version 2.4 running dedicated deployment - https://community.cisco.com/t5/security-documents/ise-performance-amp-scale/ta-p/36...
Is this what i should do to get this working ?"Cellular Interface Configuration for Always-On Connection"https://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/software/feature/guide/ehwic-4g-ltesw-book.html#con_1334907 And if so will be abl...
Thanks for the reply. But the scenario that i am seeing here is this. Once the router is brought up it will establish control connection via LTE. (all good and managed).If i make Gig0/0 connect to internet , router establish control connection via th...
