Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a large wireless network in a hospital i support. After an upgrade of all the wireless PCs to Windows 7 my wireless network is being crushed by IPv6 traffic. This has affected our Vocera system to the point where it is no longer usable. I a...
So I have two networks that are connected together via a 2851 router running PAT as well as several static NATs. Their network is a 192.168.x.x addressing scheme and mine is 172.21.x.x addressing scheme. The other day the old router takes a dump an...
Is there anyway to pull the usernames and passwords from a switch via SNMP or write a new username and password to switch via SNMP. I have switch that was apparently misconfigured and i am not feeling like driving all the way down there to console i...
I noticed that 6.0.196 does not support an automated upgrade. Anyone have any idea how i can upgrade. I tried to install it and then import a backup of the 6.0.196 database and that does not work.
I run a network for a hospital system. we recently upgraded our wireless controllers at one of our hospitals to the 7.0 code. Since then all of our GE EKG carts using a Silex SX-500 Wireless Serial Terminal Server to connect to our wireless network...
Our routing table is massive. several hundred routes. the address of the server is 172.20.24.57. below is a sh ip route for that subnet.sr01-sah-mrmc#sh ip route 172.20.24.57Routing entry for 172.20.24.0/22 Known via "eigrp 2784", distance 90, m...
Below is the config. the devices i am having issues with can communicate via ICMP, RDP and everything else except the app they run which uses port 2000. I have confirmed routing and there no firewalls or ACLs. When I do a packet capture I see the ...
We were running WPA-PSK before the upgrade. We are running the same version of code as you are and even when we remove all the security settings opn the SSID it wont connect. We did notice that the silex box behaves very oddly as far a channel and ...
