Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Two c2911 routers are connected to LAN and have HSRP configured. HSRP is negotiating successfully (active/standby), but LAN switch Enterasys Matrix E1 has problems accessing the virtual HSRP address. The switch can ping HSRP IP, and the virtual HSRP...
A c1841 router gets loosing hardware addresses of hosts connected to ports of a HWIC-4ESW module inserted. Port shut / no shut without result, only a reload solves the issue for some days or weeks. The router has been exchanged already, including HWI...
PBX reports errors daily on E1 line, connected to a VWIC2-2MFT-T1/E1 in a c2821 router, acting as a voice gateway. The "show controllers E1" output does not show any errors, the voice trunk is stable for more than 1 week. Do you have an idea, what is...
We have 7604 with WS-SUP720-3B and WS-X6724-SPF 24 ports card, running 12.2(33)SRA5. The access-list selecting the interesting traffic to be marked for business class (dscp af42/43) at the lan interface service policy does not increment counters, whi...
Hi, Two 1841 routers are connected over 2 continents with an E1 line using VWIC-1MFT-G703 controllers. The subsciber likes to implement eigrp to route local and redistributed ip networks. Up to now I have static routes configured on the E1-link. Are ...
Please let me inform about issue fixing. A reboot of the switches enabled them to accept the hsrp virtual ip and mac. I requested the customer to check for OS update recommendation of his Matrix E1.Thx to John and Paul for being engaged with my issue...
Hi Paul,Thanks for being engaged with my issue.No, I haven't tried the "use-Bia" command yet. This will only be a solution for one VLAN. But what if the second VLAN is facing the same issue? I am afraid the "use-bia" command on all router subinterfac...
No, I haven't tried VRRP, yet. I need to have a good reason to request a change from HSRP to VRRP on the Cisco routers, a problem document for example.Providers are used to implement HSRP as redundancy protocol on Cisco CE routers, and customers con...
The Enterasys Matrix E1 is a Layer 3 switch. The routes which are configured statically are needed to access remote networks in the WAN behind the routers. Example on Enterasys switch:interface vlan 100 ip address 10.20.2.1 255.255.255.248!router vrr...
Hi Alain,You hit me. A colleague of mine changed the standby group number for test while I took the output. Does the second arp output meet your reply? I also added some config files.Btw: Similar configurations run successfully on several other locat...
