Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Ive been working on a lab setup for CCNA. I have a 2901 with the UC license applied and a SIP provider.I have outbound calls working on the phones in the lab and im now trying to get inbound dialing working. I have a DID setup at the SIP provider...
I am trying to deploy 2 VWLCs on HyperV using the powershell script provided here https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-4/b_Cisco_vWLC_on_Microsoft_Hyper-V_Deployment_Guide.html
The install completes successfully and I...
Hi ive been reviewing the guide to fork audio calls using CUBE however I need clarification on the following scenario. There are plenty of examples of configuring cube forking on inbound dial peers however none on recording outbound calls.Is it possi...
Hi, I've noticed a strange issue with my CUCM deployment.
Its a fairly simple setup with a cisco 2901 as the CUBE connected to flowroute with their default setting and the Max Audio Bit Rate is set as
64 kbps (G.722, G.711)
However when I dial mult...
Hi, I have been using a sip normalization script I found on this website to modify the from header
M={}
function M.outbound_INVITE(msg)
local from = msg:getHeader("From") --Get FROM Header
local b = string.gsub(from, "<sip:.+@", "<sip:xxxxxxxxxx...
I thought that would resolve the problem however when I dial the DID from another phone system I get the following Here is the revelent part of my config voice translation-rule 3rule 1 /^.*/ /666/!!voice translation-profile External_To_Hunttranslat...
Yes! after adding voice-class sip bind control source-interface BVI10voice-class sip bind media source-interface BVI10to my inbound dial peer the error has disappeared. The only thing im missing is how do I get CUCM to route all inbound calls from th...
No it happens in any browser, And when i connect to the service port using the workaround described above it works fine.Im convinced this is down to either some change in hyperV (unlikely but it is server 2016 host) or SR-IOV being enabled on the vi...
Ok after much testing i have found a workaround. It seems this is a problem with all VWLC builds.
The workaround is to configure the service port with a IP range that isnt in use in your network then create a internal hyperv network adapter and as...
That's great sorry about the confusion. Just one more question then when configuring the dummy dial peer for the recorder eg
voice class codec 1
codec preference 1 g711ulaw
!
media profile recorder 3000
media-type audio
media-recording 100 101 1...
