Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm currently setting up a CiscoSecure ACS 4.0 using TACACS+. I want to set the login up so when I login into a switch/router I automaticly login into the enable mode at the same time. Is this possiable??I've used other TACACS+ servers that have the ...
I'm trying to turn off 'SNMP Trap Link-Status' on a 4500 with IOS 12.2When I try to use this command 'no snmp trap link-status' in a'interface range' on a module, I get this error:% Range command terminated because it failed on FastEthernet4/1I can u...
I have created access-list log/access-group so I can see all the packets coming through the serial interface. I also can see it using 'sh log' command.How can I debug a interface that would allow me to see all the packets going through it?Thanks
I needed to expand our Server Vlan on our 6509 switch. I expanded the Vlan and needed to move a server from within the Vlan but to the new expanded port. I moved the server from 7/48 to 6/48 (the new expanded Vlan port). The problem is when I moved t...
Mark,What would you suggest then for a RAS? Right now we have a T1 connection going into a Adtran 600 and it is getting split up there. There is 10 channels (all of them come from our 800 number and are on a "hunt group" ) that go into a 2500 series ...
