SNMP Trap Link-Status

[gbiettler]

I'm trying to turn off 'SNMP Trap Link-Status' on a 4500 with IOS 12.2

When I try to use this command 'no snmp trap link-status' in a

'interface range' on a module, I get this error:

% Range command terminated because it failed on FastEthernet4/1

I can use this command on each indivual port and works fine but not on

a interface range.

Any Ideas?

Thanks

[Prashanth Krishnappa]

Try 12.2(25)EWA2

http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCeg37843