About danmetheny

danmetheny · 10-10-2003

FIRST - I am very new to IPSec/VPN!!!My question is this: I am trying to figure out if I can run IPSec between and 3002 VPN Client and a 2611 router. When I do a <show crypto isakmp sa> on the router, I am getting a state of MM_NO_STATE. Thank you...

danmetheny · 10-25-2002

I am having major problems configuring my AUX ports (I know, they are not truly a "port!") to accept inbound calls for remote access to the router for management. I have several 3600-series, 2600-series and a couple of 2500-series routers that work ...

danmetheny · 09-22-2003

Keep in mind that you will never get completely to 1.5, but yes, being bi-directional, you can get close to 1.5 in each direction.

danmetheny · 09-22-2003

RTS Request To Send DTE output, DTE would like to transmitCTS Clear To Send DTE input, DCE is ready to transmitDSR Data Set Ready DTE input, DCE is ready to communicateDCD Data Carrier Detect DTE input, data link established, als...

danmetheny · 09-22-2003

There is no way to obtain this info without going to the box. As a suggestion, you might want to consider making the serial number part of the router's configuration (perhaps a loopback interface with the serial number in the interface's description...

danmetheny · 05-15-2002

When setting up serial interfaces in a lab environment, you always need the clockrate setting on the DCE end of the connection. If it wasn't specified in the lab setup documentation, either it was an oversight or the instructor was creating a bug fo...

Member Since	‎05-15-2002 05:50 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	7

User Statistics

User Activity

Can I run IPSec between a 3002 VPN Client and 2611 router?

Out-of-band management via 7206VXR AUX or Console

Re: frame relay T1

Re: leased line

Re: Router SN through Telnet

Re: CCNA lab questions