Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, In coming Call from SIP trunk through IPTSP is not matching inbound voip dialpeer. so i am unable to play IVR prompt for outside caller.Outbound calls are working fine.Topology: sccp H323 ...
I have Cisco 6500 with FWSM and ACE module which are in one central DC. Also we have four different Datacenter (Hub & spoke) and in our FWSM we have configured four contexts in central DC FWSM for each DC. Each DC servers are different VLAN and IP su...
Hi All,I am facing a problem for registering CIPC to CUCM using Aventail VPN Client. I can register CIPC locally. After connect using Aventail VPN Client to my network i m able to ping the CUCM server. But unable to register CIPC to CUCM.I have tried...
I have configured 2811 router as ntp master. But the router It self is not showing the proper time which i fixed up several times but after restarting the Voice Gateway it is becoming 10/20 minutes fast each time.i have used those command at 2811!clo...
HI experts,i m working with MP8 and integrated with SMTP server for email notification. and all are working fine. notify email is sending to the invitee but in the password field of the email is like this,Meeting password: Required But i need to send...
Thanks for your response.It was worng in my voice translation rule i fixed this.But now i am able to play IVR prompt from router local flash: but when users are dialing the enduser ext. through IVR calls are landing but no ringback tone & no RTP. Cal...
Thanks Ajay. Will you please clearify the position on ACE. cause most of the severs GW is FWSM.Example:MSFC | Vlan10 | ACE |Vlan 11 | FWSM | |Subnet1 Subnet1Vlan100 Vlan200and also flow traffice flow
