Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
a number of months back we upgraded our three server cluster from 4.1.3 upto 6.1.4 then onto 7.0.1. Now sitting at 7.1.2. At the time because of server age we actual bought in three new servers, built the cluster, did dma, then installed onto the n...
Hi all, replaced an aging 2651xm mgcp gateway, with a newer 3825 12.4(22)yb4 code, loaded with extra dsp's which have registered and are being used for transcoding, hardware mtp, and conferencing. The gateway has also registered, and will happily e...
Hi all, trying to get voice connect to work, unsuccessfully so far.. obviouisly there is a relationship between voice connect and voice access/enterprise feature access. I've found documentation that says VA /EF only works through h323 gateways, is...
Hi all, I have mgcp gateways that are connected via to our pbx's. The gateway configuration on the cucm has the codec on the pri interface as alaw. But i've noticed when I do the 'show voice call sum' on the gateway, it shows ulaw in use. I assume...
is it possible when using a mgcp controlled gateway to set the codec preference for the voip side of the call.I know regions can be used, and the intraregion default in service parameters as well. But i'm really talking here about setting a preferen...
HI Nick, came across this post the other night and i was wondering whether you reached any resolution, we've been having the same problem for months with a pair vg30d, raised a tac case but got nowhere with it and as happens its became one of those ...
To be honest Aaron thats what i'd thought, but we left it for 30minutes or so and its doing heehaw, fact that the HD/DVD lights are out as well, would seem to back up the doing nothing suggestion.Last thing we see is:Blue screen "Loading CCIS driver"...
Rob, thanks for reply, from your post it would appear that the old server must see the pub to be able to upgrade, yes?So need to change address/hostname, add to existing cluster, put on network then update, yes??At the moment we've tried to upgrade i...
Aaron thanks for reply,the hardware on the server we wish to add in is compatible, its more the steps to take that i'm questioning.Change the ip address/hostname of the old serverthen upgrade it. From your post you reckon that I couldn't build this ...
route patterns, route lists all okay. when I do a debug isdn q931 don't see the call getting to the router, but everything looks right, and dialled number analyser gives back what i'd expect... Anyone any idea on the best mgcp debugs to use to see ...
