Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello. Can Cisco DECT phones SPA302D and base station (http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10998/ps12776/data_sheet_c78-717757.html ) be used with Cisco Communications Manager Express (CME) or can they only be used with...
Apparently, the IOS XR "mpls ip-ttl-propagate disable" command is unable to hide the IP address / MPLS label of the PE egress router:CPE1#traceroute 1.1.1.1 probe 1Type escape sequence to abort.Tracing the route to 1.1.1.1VRF info: (vrf in name/id, v...
Is there any recommended Text-to-Speech (TTS) solution that can be integrated directly with Cisco Unified Communications Manager (CUCM)?The TTS solution from Nuance, for example, requires Cisco Unified Contact Center Express (UCCX).The goal here is v...
Hello.What is the maximum number of simultaneous calls supported over a SIP trunk on a UC 520?I know that for a Cisco 2801 is 55 and for a Cisco 2901 is 100, but I could not find any information for the UC 520/540/560 platforms.Thanks in advance for ...
Hello.Is it possible to have a script that can shutdown a 3G interface when a pre-defined monthly traffic is reached and that reactivates the interface on the first day of the following month?The scenario is that a customer has a Cisco 800 3G routers...
The datasheet also does not mention CME (Communications Manager Express).So it would be interesting to know the compatibility of SPA302D both with CUCM and CME...
Thank you for your help. However, we need a TTS solution and not a STT solution. We need a solution that can, once the call is established, reproduce an audio message that is a conversion of a message stored in a file (Text-to-Speech).So, if I unders...
Hello Joseph.Thank you for your help. Losing state due to a device reload is a concern, since for that month, we won't be able to guarantee that the 3G plafond is not exceeded. However, since a device reload should be rare, that is not very serious....
Hello.On a simple environment, you could implement ACS Shell Command Authorization Sets, as described in the following document: http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtmlHowever, in a ...
