Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day
Trying to do a software update from CE 8.2.2 to CE 9.3.2 but it keeps failing? Ive seen that there is mention made on how to do this in the CE 9 release notes but no clear instruction on how to do it. Can anyone please supply me with thi...
Good day all
I have an integrated room that has 2 x GEN2 Ceiling mics installed. A sensor switches the 2nd room off when the doors close. The 2nd microphone is in the 2nd room. The SX20 codec does not have commands to switch the mics off individu...
Good day all
Can anyone supply me the pin out needed to extend the 12 x zoom camera control cable (network cable) when connecting to an SX20 with the break out cable
SX20Breakout cable12x zoom cameraStraight HDMI cable (10m)
Thank you!
Good day all
We have an SX80 installed at a client with some network related issues. Here is the problem:
When running a continuous ping to the SX80's IP and you try and access the Web Interface the ping drops and no access is allowed to the web-in...
Good day all I'm looking for a step by step guide on accessing an SX20 codec via SSH. TAC has requested that we pull xConfiguration and xStatus logs as part of their required info.Thank you.
Hi
Seems to have been managed switch related, our own factory reset Netgear switch did the job for now, following up with the onsite networks team in the AM to test.
Hi allWe have just completed the installation mentioned in my original post. It worked and its very easy!Order you SX20 with the 12X zoom camera. You will get a camera cable that has the new propriety camera cable: (HDMI and control) to a separate HD...
HiNo not yet the install will only happen in about a month. Will keep you updated. Ravi I hope your plan works!Sent from Cisco Technical Support iPhone AppSent from Cisco Technical Support iPhone App
