Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm running 15.3(3)S on a group of three ME3600X switches and I'm having some issues testing autoroute announce. I've built a tunnel from one of my ME3600X switches to a remote router and the tunnel is up and accepts traffic from the local switch:P2P...
Hi,I am attempting to set up G.8032 ERPS on our ME3600s that run 15.3(2)S. I want to know the specific procedure to do so on a live, production ring. When I attempt to do this today, the interfaces added as the 'port0' and 'port1' interface immedia...
Hi,It's my understanding that MSTP switches must have the following identical information configured in order for it to participate in a region:NameConfiguration revisionVLAN-to-MSTI mappingDo all VLANs need to be created on all switches in the regio...
While configuring an ME3400 for the first time, I noticed that the physical interfaces offer the ability to enter a 'rate-limit' command. There is also the option to configure policing within a 'policy-map' and attach that to an interface using the ...
Hi,I'm trying to configure traffic policing on a Catalyst 2950. The config is pretty straight-forward, or so I thought. I need to set up several policy-maps, each one policing traffic at different levels (5meg, 10meg, 20meg, etc.). My problem is, ...
I suppose that depends on what you mean by "protect" . For one, if the SVI is in a bridge domain and the SVIs physical interfaces go down, that would cause an event which would force a recalculation of the tunnel, no? Additionally, I would say that...
Thanks, Madhu. What do you feel the best course of action is? Should I open a new case on this or continue logging it to my currently open case.The odd part about my open case is that it seems to be based solely upon destination prefix *length*, wh...
Looks like the switch 24 is not able to either impose a tag or swap the tag and send out to next hop.That's what I thought, too, as the traffic is not even leaving the 24 switch, according to packet captures taken between the 24 switch and the 12 rou...
Hi Madhu,Unfortunately, adding 'mpls ip' to the tunnel interface doesn't help - pings still drop from behind the "24" switch. The path is the exact same whether 'autoroute announce' is configured or not:ME3600X-4.lab#traceroute mpls traffic-eng tunn...
