Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Experts,The Anyconnect 4.0 licensing guide seems kind of confusing.If you have a customer with 1000 users and an ASA that supports 1000 simultaneous connections, but you only have a license for 250 users, does that mean that you cannot install An...
Hello Experts,Is there an intuitive way to extrapolate what features a customers is running on a router / switch without actually sifting through a "show run" for a given platform? Are there any automated tools or applications that might help with th...
Hi LAN Switching and Routing Experts,Some would say that HSRP load balancing is a well-known, developed and deployed best practice within the industry for load balancing of L2 traffic per vlan. A friend and former colleague explained that they do not...
Hello Fellow Experts,Are there any Cisco documents that implicitily recommend the use of smaller subnets over larger ones? i.e. VLAN Design Best PracticesAside from the obvious benifits, can anyone think of other advantages other then the following:A...
Hello Fellow Experts,Are there any Cisco documents that implicitily recommend the use of smaller subnets over larger ones? i.e. VLAN Design Best PracticesAside from the obvious benifits, can anyone think of other advantages other then the following:A...
Hi acontes, It's an interesting question. In this case, if all AP's are on WLC-A and there is no possibility that an L3 inter-subnet roam will occur between WLC-A and WLC-B, I would just forward WLC-A to Anchor A and WLC-B (in the event of fail over)...
Topology?WLC-A, Subnet-A <--EoIP--> Anchor A (DHCP PoolA)WLC-B, Subnet-B <--EoIP--> Anchor B (DHCP PoolB)Scenario 1If all of the AP's remain on controller A and are Anchored to Anchor A, there will not be a problem. Scenario 2If AP's are evenly disbu...
HiWhen a PC is connected to the switch, you can you ping 192.168.1.100?If you are connected via Wi-Fi, you will need to enable Management over wireless, otherwise you cannot manage the controller. http://www.cisco.com/c/en/us/td/docs/wireless/control...
