Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm just getting started with PE and have installed the 2.2.3aPE1 OVA so I can import an existing config that is running 2.2(3b). Setup went fine so I imported my existing config, checked it for errors (none) and then restarted. Once it was bac...
Hi all,I'm looking for real-world numbers on ASA performance and am having trouble finding them. Can anyone comment on how many packets per second their ASAs are running on each interface? I ask because I recently upgraded 5520s to 5550s but I'm no...
Hello,I'm looking to adjust the OSPF interface cost on one of my ASAs to match the rest of my network. Other ASAs have the command "ospf cost 1000" on their interfaces but this particular ASA has a trunk with subinterfaces. Has anyone run this conf...
Hello all,Has anyone seen/built a config in which a pair of 6500s in VSS are used at the Internet Edge? I picture the VSS multi-homed to several ISPs using BGP and the FWSMs providing ACL/NAT functionality.Please let me know if you have seen this do...
Hi,I cannot find this in the documentation anywhere so I apologize if this is rather simple. How do I connect both TCCP cards of 15454 to the LAN? I know the cards have a hub between them so plugging them both into a single switch (or multiple swit...
No problem - as long as it wasn't something I did. I gave up on that domain and imported a different one that seems to be fairly stable so far. Any explanation as to why all chassis would suddenly become disconnected from the FIs? They were connec...
Yeah, that's why I posted, nothing is clear about subinterfaces. I'm 99% sure the OSPF cost is assigned to the root interface only but I can't find definitive docs to confirm. No big deal. It's working and looks as expected so I'm just going to mo...
Hi,Unfortunately, no, dynamic IP addresses are not going to work. Yes, you must have the same hardware and OS version on each PIX. I believe the PIX 525s are EOL and you will not be able to get a contract on them but you would have to ask a Cisco r...
Hello,The first thing to understand about FO is that the units are almost identical in config so only 1 is active at any given time and the other is standby. They communicate over their failover cable or a dedicated Ethernet cable/interface between ...
Hello Guiseppe, thanks for your response.Yes, I am aware of the throughput limits on the FWSM. I actually started looking at the ACE/FWSM load-balanced FW designs in order to scale beyond 1 FWSM so Active/Active is the way to go with a solution like...
