Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Experts,
I'm trying to better understand how CUC is integrated in an SME environment. The design is a centralised SME cluster with CUCM leaf clusters in 3 regions. All 3 leaf clusters are to share a 20K user CUC cluster. The CUC is to have a S...
Hi,
I have the following setup: Phone --> CUCM --> SIP Trunk --> CUBE --> ITSP
The SIP trunk to the provider will be used by a number of company offices in Europe. When an outgoing call reaches the CUBE it will be directed to a dial peer that cont...
Hi all,I am putting together a BOM for a UC deployment of CUCM, CUC and UCCX. I have chosen a C220 as the platform, part number UCUCS-EZ-C220M3S.However, I am struggling to determine what VMWare component to add to this order. My server has 64Gb of ...
Hi all,I wanted to get some perspective on the MTP requirements that may or may not be required with the lastest software versions.The scenario is as follows: ITSP<---SIP Trunk--->CUBE<---SIP Trunk--->CUCMThe CUCM is running version 9. The CUBE s...
Hello All,I have a CME and CUE implementation. A user has asked than when a call comes into her DN that if after 5 rings it is not answered, a message is played something along the lines "we are trying to connect you, please wait" and then for the c...
I looked at remote party transformations on the device and correct me if I am wrong but this is only for calling party transformations? - I want to transform the called party number.
I forgot to turn on the service parameter - confirm that this opti...
In my 183 message from CUBE to CUCM there is no RPID field. In the 200 message from CUBE to CUCM there is a RPID field but as the call is connected at this stage the user will have already seen 44907... on the display. This is what I want to avoid.
...
Thanks for the reply. If I just enable no remote-party-id under sip-ua and do not use any SIP profiles, then when the call is connected it shows the dialled number without the 9 prefix. I could use a SIP profile to add a 9 to the RPID to show the di...
Thanks for the reply. I had looked into SIP profiles before but I'm not sure they will work in this instance.
CUCM sends an invite to the CUBE with the CALLED number set with a prefix of 449. To control the phone display, I would need to edit the 10...
