Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all! We have 4 x WSA S395's all licenced for 350 users. We are now introducing an SMA M395 for all of the WSA's to connect to for central management and reporting. We need the following licenses: Cisco Centralized Web Configuration Manager and Cis...
Hello, We are configuring a VPN tunnel between a router and ASA. The router has an ACL like this: ip access-list extended VPN-TRAFFICpermit icmp 10.52.128.0 0.0.15.255 10.11.0.0 0.0.255.255permit tcp 10.52.128.0 0.0.15.255 10.11.0.0 0.0.255.255 eq 44...
Hi all, I was just wondering if anyone has any experience with connecting 4G routers using the provider Three?I have a 881G-4G which connects perfectly connecting to cellular when using a BT sim card. It then also establishes a secure VPN tunnel to o...
I have a Cisco 887VA on site at one of our remote sites. It establishes a VPN to our Cisco ASA using ipsec and a preshared key.That all works fine and our users can connect to all internal services and internet traffic passes through our internal con...
Hi all, We have a C887VAG-4G-GA-K9 router we're trying to configure as a VPN spoke (ASA 5515 at the hub).It uses cellular for its internet access. It took us a good while, but, with thanks to this forum, we got basic internet access working on the ro...
@Muhammad Awais Khan Thank you for taking the time to reply. Any suggestions are appreciated. Are you saying that because of this entry, its forcing all traffic through the VPN tunnel? Including the phone data?My DHCP scope for this network is 10.11....
Hi all, Firstly, thanks to everyone who helped with this issue. We have finally got some of our routers to now work with our BT and three.co.uk SIMs. Unfortunately, we have come to the conclusion that we have a defective C881G-4G-GA-K9 though So th...
Hi Paul, rtr-h000619#show cellular 0 radio
Radio power mode = ON
Current Band = WCDMA 2100, Channel Number = 10761
Current RSSI = -88 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
Primary Scrambling Code = 0x8A
RSCP = -84...
