Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Community, does anybody know if/when it's possible to use 802.1X authentication with the TelePresence InTouch 10? It perfectly works on the C/SX codecs and as long as the Panels are connected directly to the Codec, there is no issue. But on some...
Dear Community, this is a reference to this thread:https://supportforums.cisco.com/discussion/12316076/jabber-phone-mode-breaks-presence-outlook-lync Due to the EoS of Jabber Video (Movi), I have a lot of customers who want to migrate to Jabber for W...
Hi Community, I am currently planning to migrate from the good old Jabber Movi (VCS, TMS) to Jabber for Windows (CUCM, Phone-Mode only). The client is just used for video conferencing. In the old setup the users were imported via Active Directory int...
Dear community,I have a physical cabling question, not sure whether to put it under security or under switching...in our co-location, we have a redundant internet uplink from the ISP. At the moment those uplinks are connected to our switch-stack and ...
Dear all,my customer wants to allow endpoints to only register via SIP TLS on their VCS-Expressway. B2B calls shall be allowed via both SIP TLS & TCP as well as H323.Is there a way on VCS to deny SIP TCP and H323 registrations via CPL?If yes, how?I m...
got it working. It didn't work with 10.5.2 but it DID work with 9.7 and the command line above. After installing 9.7 I was able to make an upgrade to 10.5.1 and that worked well, too. Now I am afraid to install 10.5.2, maybe there is a bug which brea...
hmm, unfortunately that's not working on my side. I tried to install a fresh downloaded copy of Jabber 10.5(2) with the following command line:msiexec.exe CLEAR=1 /i CiscoJabberSetup.msi CLICK2X=DISABLEbut this changes nothing. I tried it several tim...
Hi Mark,you are still able to dial via IP - even if you turn off the setting in TMS. This setting just "tells" TMS that this endpoint is not able to dial via IP and hence will not receive IP Addresses in Phonebooks and you are not able to schedule th...
Hi,I always had dbowner rights on the tmspe db and that worked fine, but isn't sysadmin a much higher privilege level which allows you to do everything? If so, this will work well altough I would not recommend to leave it with that high privilege due...
Hi Douglas,if you're not making an upgrade of your TMS version, that should be fine. I would keep the local SQL server running for a few days so you're able to switch back quickly if you would need to.Best regards,Alex
