Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,What is the best way to achieve QoS on a TCP traffic? For eg I want to achieve a throughput of 10Mb. As we are a service provider we apply rate limit at our end. So if we have to do shaping on egress traffic it takes buffer for each customer and t...
Is there anyway to pass the VRF ID from the radius for ipsec client. I require the cisco avpair. I tired ipsec:vrf-id= , ipsec:ip-vrf= and ipsec:vrf= but no success.Thanks,Silju
Hi,Has anybody faced the following bug in the network on GSR? Was there any impact on the service?%TAGCON-3-LCLTAG_ALLOC: Cannot allocate local tagThanks,Silju
Hi,I am getting the following error message on the MPLS-PE router. As there are lot of customers with same ip address (in different vrf) how do I trace which customer is sending the snmp requests. Is there any quick method to resolve this issue.Sep 1...
HI,I have a call manager shared by two customers. I have configured partitions and CSS so that they dont dial each other. But I can see that the corporate directory includes both the customers. How can I seperate it, so that they dont see each other?...
1526 is fine if you are not running protocols like l2tp in your network. But I suggest to keep it to a higher value than 1526. It depends on the switches you use within your network as well (if they are between the routers). For eg 3750 supports a ma...
Hi Ankur,Policing will not help to achieve the desired throughput for TCP because of its saw tooth nature.http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a3a25.shtmlBut with shaping we can achieve the throughput but the d...
In my opinion loopbacks can be public addresses and link address can be private address. All your services including the internet service will be in the vrf (uplink to ISP as well) so that your network is completely hidden from internet and the custo...