Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi
I've attempted to upgrade the IOS of 2 of my cat3650's. After rebooting them the one I didn't delete enough files to have room for the new IOS the second I did and it's giving me another error.
First Switch
switch: bootNot enough free memory for e...
We have a weird issue that's been going on for a bit now. Basically some of our SIP phones don't broadcast pages through the speaker some of the time. Our Cisco UC system has an extension set for paging through both over head speakers and through a I...
HiI have the following deviceCisco PIX Security Appliance Software Version 7.2(4)Device Manager Version 5.2(4)Compiled on Sun 06-Apr-08 13:39 by buildersSystem image file is "flash:/image.bin"Config file at boot was "startup-config"FW1-Primary up 1 y...
HiI'm having an issue with getting RADIUS working on a SF 302-08MPP. RADIUS server is working fine with other switch ie cat2960's. I keep getting the following error when I attempt to login using AD credentials, which work on my other switches.Invali...
HiI was just shipped some 30PWS-C2960X-24PS-L 4 had the twist lock power cables and the remainder had the standard power cable. These switches will be used to support IP Phones and possible some Access Points using PoE. Is the 240v really necessary...
Thanks, I guess I have a little fun ahead of me.
I guess I'll be booting the devices from a USB drive, to recover the switches. then do my upgrades, this time reading the release notes. lol
I believe I tried that and it gave me the following error, but I'll try it again after the call I'm about to go on to. thanks
switch: delete /force flash:cat3k_caa-wcm.SPA.10.1.140.0.pkgAre you sure you want to delete "/force" (y/n)?yFile "/force" no...
We upgraded the firmware on most of the phones, they worked fine this morning when others with the older firmware had issues. We'll be upgrading the rest over the weekend.
We just did some some testing when I did a show ip igmp snoop group, I saw most of the ports with phones attached show up. However, the person who was doing the tests mentioned it seemed like no phones where working when it failed. He's going to upgr...
Nothing in the logs on the access switch or the distribution switch. Phones are 7841s and 7821s firmware is Phone Configuration sip78xx.10-2-1-12SR1-4.
Thanks
John
