Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I've got a 3850 stack running IOS: Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.06.04.E RELEASE
It's setup as an L3 switch with two Vlans (Voice & Data) and a default route to a WatchGu...
Hello,I'm debating my options currently for upgrading one of our end of row consolidated core/distribution switches, we currently run a stack of 7 x 3750G's which are aging badly.Option 1:Straight upgrade to 3750-X based stack or newer 3850's. Option...
Hello,I've been trying to track down a particular feature on Cisco's Feature Navigator and have come up with a question, is it possible to run a 7600 IOS on a SUP720-3BXL when in a 6509 Chassis?Fundamentally the Supervisor engine is the same and I co...
Hello,I've got a recurring them developing across several deployments of Catalyst 3750X series switches, I'm seeing large amount of output drops accross multiple ports but there are is no QoS deployed on any of these switches. (standard FiFO).As it h...
Hello,Has anyone ever been crazy enough to attempt to enable MPLS on two CE devices that are on either end of a L2VPN (MPLS Pseudo-Wire / EVC), I'm aware of the MTU issues that would imposed not to mention the label complexity that would ensue.Has it...
Hi Paul,
It's purely a next hop IP at the moment, if I did it based on interface that would be difficult as the WG FW is in the same subnet (still doesn't ping). So the next hop interface could be one of two ports depending on which cluster member wa...
Thanks Reza,Valuable input, I think at the moment the Sup-2T model is out of range since I would also ideally change all the line cards to DFC4/PFC4 at the same time and we're heavily invested in the older DFC3/PC3 X6700 cards.We don't have the throu...
Hello,Just a wild thought here, but you could try running MPLS inside the EVC from Verizon. You'll lose a bit of available MTU with all the extra tagging & labelling bit you'll end up with more options?I assume your CEs are MPLS capable?HTHDunc.Sent ...
Hi Tom,The line about "Setup" makes me think the device is factory resetting every time you reboot it? But surely you would of seen that?What is the current configuration register? "Show version".DuncSent from Cisco Technical Support iPhone App
As Paolo said get Cisco involved direct, I would add that if you're laying fibre you would be wise to maximise your investment and light either end with DWDM kit so you can ultimately grow In the future.You could also lease wavelengths depending on w...
