Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to configure LDAP authentication for wireless clients. I found various documents describing LDAP setup, but they only seem to offer a portion of the config.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide...
I had a working VPN with users authenticating via LDAP. One day it decided it did not want to work anymore. We are not aware of any changes to the ASA and the only thing that may have changed on the LDAP server is windows updates...
We are running Call Manager 9.x and I have a 2921 with a VWIC2 1MFT module. We will have a 7 channel PRI coming into this card. The provider will present them as 2 different channel groups. One will be 1-6 and the other will be ...
I abandoned this altogether and determined it was easier to just configure radius and use NPS on the windows server to pass domain authentication. So I installed NPS and configured it to allow a specific windows group and it seems to be working fine...
This is what we purchased, an ASA with the 120 SSD and the IPS Service license for the CX module:ASA5512-SSD120-K9L-ASA5512-IP1Y= However, we had intended to buy the classic IPS module, but were told to get this instead by our vendor. We in the proc...
Marvin, we just bought thisASA5512-SSD120-K9L-ASA5512-IP1Y=We originally intented to buy the classic IPS for our customer, but our vendor indicated that the CX module with the IPS service was essentially the new replacement for classic IPS module. H...
I have been unable to install the Hotfix. It just won't install. MS says that it has to be installed on a server running AD DS, which it is, but it just wont' install. I report back more when I know more.
Still same response. I did replace the *** with correct passwordaaa-server LDAPServerGroup protocol ldapaaa-server LDAPServerGroup (inside) host 10.0.1.136 server-port 389 ldap-base-dn DC=pip,DC=local ldap-scope subtree ldap-naming-attribute sAMAcc...
