Hello,We have a very large DMVPN deployemnt. Out PKI SA server is a Cisco ASR1001. The cert data base is on a UNIX box.The DMVPN Hubs are ASR1001 and spoke are 881, 891, 1941 cisco routers.Problem: randomly SA server connection to database server dis...
Hello,I have a very large L3 switched network. The Lo0 is used for managing the switches, no mgmt. VLAN, in an OSPF routed network. Each switch has multiple VLANs.The VLAN 1 is either 1) disable on some 2) it is in UP/DOWN state on some 3) UP/UP in s...
Hello,I am tasked to identify all un-used, in-active, and idle rules in Cisco ASA firewalls. I have access to CSM. But in CSM, I do not know how create such a report. I would be grateful if someone can help to create such a report. If...
Hello,I have a pair of ASA 5540 running 8.4 code. The firewall set has about 4500 rules. I am tasked to identify all unused/idel/inactive rules in the past 3 months .Would any one know of a quick way (CLI or CSM) to identify or list such rules? I wil...
Hello,I read some where that I can pre-position (upload) the new LWAPP or CAPWAP to access points before I upgrade the WLC code. This will reduce the time it takes for the APs to download and run the new code from the WLCI am not able to find a docum...
Hi ericgarnel,I am not running IIS on the server. I removed the WCS 4.2.97.0 and rebooted the server. I still get the same port hhtp (port 80) is being used by another application.thanksBo