Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
People say you should use the MinTX when calculating loss budget, if so, what is the Max TX used for? The QSFP-40G-ER4 has a MaxTX of 4.5, but a MinTX of -2.7. Can I use the MaxTX of 4.5 & MaxRX of -21.2 to create a loss budget of -25.7? or is this b...
So after I upgraded to WAAS version 5.3.5 a lot of the devices have 100% CPU for the next few days!!!!!!!!!!!!!! Sometimes a reboot brings it back down, sometimes not.Appears to be low priority NICE processes, right?Would lt-db_verify be doing a da...
Any Cisco reps willing to comment if there will be F3 modules which have 10GBase-T interfaces????I know the Nexus 9508 will support both, but I believe it has less features than the 7700, right? How does the 9508 compare to the F2e modules?
Hey Guys,I can't for the life of me find any reference to the rack mount kit on Cisco's website. the 1921 used to have a rack mount kit ACS-1900-RM-19= available, but I can't seem to order it anymore.http://www.cisco.com/en/US/prod/collateral/modules...
Router# copy scp://1.2.3.4/isr4300-universalk9_npe.16.09.02.SPA.bin bootflash:/isr4300-universalk9_npe.16.09.02.SPA.binRouter# configure terminalEnter configuration commands, one per line. End with CNTL/Z.
Router(config)# boot system bootflash:/isr...
http://www.cisco.com/en/US/prod/collateral/routers/ps5763/data_sheet_c78-728110.html The Cisco CPAK 100GBASE-SR10 module (Figure 2) supports link lengths of 100m and 150m on laser-optimized OM3 and OM4 multifiber cables, respectively. The module ...
I could be very wrong, but I think its called VN-TAG, similar to fabric extenders for Nexus.There are a couple of pictures on page 28-31 here: http://www.cisco.com/web/CZ/ciscoconnect/2013/pdf/T-NET1-Catalyst-Jarry_Pilar.pdf
No, not 2 SFP ports, about 10.The C3K is used as a core switch in many small branch sites with only ~20 users in the main office, where companies would seriously baulk at paying $30K extra just for fibre aggregation.Standard branch for many parts of ...
Well thats dissapointing, means spending $30K, for two 4500X just to provide dual fibre uplinks, won't fly with management. Cisco will lose business......
