Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I having a problem with incoming pstn call to the call manager. Incoming pstn calls will rings twice then silent for about 12 secs before the internal phone rings. CUCM is connected to MGCP gateway (cisco 2811 router with FXO). There is no problem...
Hi,Currently i need to access 1 remote site to the other remote site via vpn tunnel. how can i achieve this?I need to ping 192.168.2.1 via 192.168.1.1Please help, ThanksRemote site 1 (192.168.1.1 via cisco 877) ------------ ASA 5510 ------------- ...
Hi,currently I need to connect to remote server via vpn client.How can i procced with the below setup?Thanks VPN client ----> ASA (192.168.1.1) <----site-site ---> ASA (192.168.2.1) -----> Server (192.168.2.100)
Hi Nicolas,Thanks for your reply. I found out that I need to install the microsoft IAS and need to know how to configure on the Cisco AP1252 on authenticate via radius.Pls advise. Tks
Thanks for the reply.from my asa to remote site is connected via 877 router.For example, my VPN client ip address is 192.168.1.0/24HQ 192.168.2.0/24Branch 192.168.3.0/24After reading thru the forum solution,the way out is like adding another network ...