What would be the default behavior if there is no matching criteria under class-map match-any? Would that turn into "match-all' behavior?? Example:class-map match-any test!policy-map remarkdefaultclass testset ip dscp default!interface GigabitEtherne...
Hello, does anyone has an opinion doing NetFlow with 7204 NPE-G2. I need to know if this router will be able to handle netflow if it has 70 Mb circuit coming into it. We also may have QoS configured on this. Thanks, Naren Bhungalia
Has anyone come across throughput issue with GigE IP+ on 7507 running SRDF traffic? I'm trying to run SRDF traffic from EMC to CNT to 7507 through 6513.Thank you, Naren
I tried to configure VPI/VCI 1/888 on my IMA circuit and router didn't like it. The highest VPI/VCI it will let me configure is 1/255. I was wondering if there was any limitations on that. If anyone has any ideas, I would appreciate it. Thanks
I'm seeing significant line errors on the 2nd controller on VWIC-2MFT-T1 when there is a T1 line connected to both controllers. And if there is no T1 connected into first controller, there are no errors on the 2nd controller. Has anyone come across t...
Nothing suspicious in the syslog. We thought that the SNMP was killing it so we disabled SNMP from HPOV, CiscoWorks, and Lucent's VitalNet. However, problem still persists. This router does run high on the CPU, mainly on OSPF process.
Thanks for your reply! I tried to look for a white paper on CCO to verify this but was unable to find anything. However, I did find the following information which suggets that the PA-MC-T3 should work with 7204. Any thoughts??ObjectivesThis document...
