Hi Everyone, Try this one, it worked for me, under Administrative Tools > Services, Stop "Windows Defender Service" Regards, Wendell ... View more

Hi Everyone, Try this one, it worked for me, under Administrative Tools > Services, Stop "Windows Defender Service" Regards, Wendell ... View more

Hi Everyone, Try this one, it worked for me, under Administrative Tools > Services, Stop "Windows Defender Service" Regards, Wendell ... View more

Hi, here is my topology, and attached are the configs for R1 and R2.. =======   R1   ======= ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! boot-start-marker boot-end-marker ! enable secret 5 $1$n2ON$l.VCLnNtg0vGLyKncWCPk/ ! no aaa new-model memory-size iomem 5 ip cef ! no ip domain lookup ip domain name lab.local ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ! multilink bundle-name authenticated ! username wendell secret 5 $1$V03R$TRU0vGoOkqdwHwIH.vk.k0 archive log config   hidekeys ! track 10 interface Serial0/1 line-protocol ! track 20 interface Serial0/1 line-protocol ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface Serial0/0 no ip address shutdown clock rate 2000000 ! interface FastEthernet0/1 no ip address speed 100 full-duplex ! interface FastEthernet0/1.10 encapsulation dot1Q 10 ip address 192.168.10.2 255.255.255.0 ip nat inside ip virtual-reassembly standby 10 ip 192.168.10.1 standby 10 priority 150 standby 10 preempt standby 10 name GROUP10 standby 10 track 10 decrement 60 ! interface FastEthernet0/1.20 encapsulation dot1Q 20 ip address 192.168.20.2 255.255.255.0 ip nat inside ip virtual-reassembly standby 20 ip 192.168.20.1 standby 20 preempt standby 20 name GROUP20 ! interface Serial0/1 ip address 2.2.2.2 255.255.255.0 ip nat outside ip virtual-reassembly clock rate 2000000 ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 2.2.2.1 ! no ip http server no ip http secure-server ip nat Stateful id 10   redundancy GROUP10    mapping-id 10    protocol   udp ip nat pool NAT_POOL 2.2.2.2 2.2.2.2 prefix-length 24 ip nat inside source list NAT_ADDRESS pool NAT_POOL mapping-id 10 ! ip access-list extended NAT_ADDRESS permit ip 192.168.10.0 0.0.0.255 any log permit ip 192.168.20.0 0.0.0.255 any log ! control-plane ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous line vty 0 4 login local ! end =======   R2   ======= ! ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! boot-start-marker boot-end-marker ! enable secret 5 $1$hy/7$TzdG88xM6Nvgv8bYTv3q1/ ! no aaa new-model memory-size iomem 5 ip cef ! no ip domain lookup ip domain name lab.local ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ! multilink bundle-name authenticated ! username wendell secret 5 $1$sFCW$ze43rU6FkadiLG6X1JcYv. archive log config   hidekeys ! track 10 interface Serial0/0 line-protocol ! track 20 interface Serial0/0 line-protocol ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface Serial0/0 ip address 3.3.3.3 255.255.255.0 ip nat outside ip virtual-reassembly clock rate 2000000 ! interface FastEthernet0/1 no ip address speed 100 full-duplex ! interface FastEthernet0/1.10 encapsulation dot1Q 10 ip address 192.168.10.3 255.255.255.0 ip nat inside ip virtual-reassembly standby 10 ip 192.168.10.1 standby 10 preempt standby 10 name GROUP10 ! interface FastEthernet0/1.20 encapsulation dot1Q 20 ip address 192.168.20.3 255.255.255.0 ip nat inside ip virtual-reassembly standby 20 ip 192.168.20.1 standby 20 priority 150 standby 20 preempt standby 20 track 20 decrement 60 ! interface Serial0/1 no ip address shutdown clock rate 2000000 ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 3.3.3.1 ! no ip http server no ip http secure-server ip nat Stateful id 10   redundancy GROUP10    mapping-id 10    protocol   udp ip nat pool NAT_POOL 3.3.3.3 3.3.3.3 prefix-length 24 ip nat inside source list NAT_ADDRESS pool NAT_POOL mapping-id 10 ! ip access-list extended NAT_ADDRESS permit ip 192.168.10.0 0.0.0.255 any log permit ip 192.168.20.0 0.0.0.255 any log ! control-plane ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous line vty 0 4 login local ! end ======= R1 is default router for VLAN10 R2 is default router for VLAN20 R1 NAT for VLAN10 R2 NAT for VLAN20 When R2 is down, NAT for VLAN20 is not working, getting unreacheable from PC2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds: U.U.U Thanks, Wendell ... View more

Hsrp one vlan plus stateful nat works but unable to use in multi vlan environment. Please help. ... View more

corection on access rules, subnet .18 not .118 allow any source from WAN1/LAN to 172.16.18.1 ~ 172.16.18.255 ... View more

hi Te-Kai Liu,       i have a question regarding multiple subnets      currently my rv 042 has 2 addresses;           192.168.18.1 - device address           172.16.18.1 - subnet 1      i can access all 192.168.18.1 resources when connected to the VPN, however i cant access 172.16.18.1.      sure 192.168.18.1 can reach 172.16.18.1 and vice versa      i created access rules,  allow any source from WAN1/LAN to 172.16.118.1 ~ 172.16.118.255      is it really possible for vpn user able to reach multiple subnets? ... View more

i have the same problem, we are  using AS5350 May  6 2013 12:02:30.663 SGP: tdiff:2065722084 tx2:858 rx2:761 pps2:50 ve:0 exp_p2:15476 pmc:1 May  6 2013 12:02:30.663 SGP: Potential Mute Call: May  6 2013 12:02:30.663 SGP: CallID1=28886; CallID2=28887; ConfID=11745 May  6 2013 12:02:30.663 SGP: Leg 1: CallID=28886; TX packets: 743; RX packets: 849 May  6 2013 12:02:30.663 SGP: Leg 2: CallID=28887; TX packets: 858; RX packets: 761 ... View more

Hi Dan, sure will move the thread and will try to configure ata tomorrow.. Ty ... View more

for SPA301 and 302 no issues, i have provisioned it correctly, LINE number is directly equivalent with Extension number. but since SPA232 has PSTN and Phone with 10 Lines, i have not tried reaching line 4 in xml file. i noticed line 1 is equivalent to Phone LINE. line 2 does not affect anyting and line 3 also not affecting anything. ... View more

Hi Dan, i tried this  /admin/config.xml howeve it is jumbled/encrypted of some sort. i just noticed you wrote line_enable 4 as your example, is line 4 equal to DECT 1?  i tried configuring, line 1-3, and not 4,.. i will try 4 on monday and will post updates. thanks ... View more

firmware version? ... View more