Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 5 buildings surrounding our main building. None of them are wired for networking. Currently, I have a 1300 bridge in the main building plugged into a network switch, and an external antenna up on the roof that has line of site to each of the ...
I need to convert a T1 connection to Ethernet, and then plug the Ethernet into a vendor-configured SonicWall TZ205. Seems like there should be a simple "media converter" type box that could do that for me, but I haven't found anything like that.I ha...
I have an AIR-LAP1242AG-A-K9, serial number FTX1623B0RX. I just need to know how old this unit is. Any idea how I find that info? (I haven't attached it to our Cisco account, so I can't open a TAC for it.)Thanks!Boot Version 12.4.13.0 IOS Version ...
Product/Model Number:AIR-BR1310G-A-K9 System Software Filename:c1310-k9w7-tar.123-7.JA System Software Version:12.3(7)JA Bootloader Version:12.3(2)JA4 We have several of these bridges hanging around; would like to move them one at a time from our 103...
We recently installed 15 of these switches, and we're having a few odd, random network issues. But before I enumerate those issues, I have a simple question: are the connection lights on these switches *supposed* to blink rapidly? Or are they suppose...
*sigh* I set a 3602 to "bridge", and now it won't join the controller any more. I'm heading out for the weekend; I'll pick this up again on monday. Thanks for your help so far!
Ah...set it as a bridge first, then the "mesh" tab shows up. That makes a bit more sense.Those first two links are for a 1500 series AP; do they also apply to my 3602's?
Ok, that's a good start and helps me define terms a bit, but how do I actually set them to RAP or MAP? I don't see how in either of your links. The only options I have on the 5508 are:LocalFlexConnectMonitorRogue DetectorSnifferBridgeThe 5508 is runn...
Thanks for the info Richard; seems simple enough. I'm looking over the link and not exactly sure what example to zoom in on. It's serial T1 on one side and ethernet on the other side, but I don't know if that means "frame relay" or what.I've also rea...
