Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello.
We have installed several outdoor access point (model Cisco 1552E) powered by PoE shielded twisted pair copper. However, it has left the AC power entry port exposed to the environment. There is no provided cap in the box to have cover it.
I h...
Hi.We are installing a bunch of 1140s & 1250s indoor access point powered via Cisco 3750 PoE switches.Is it necessary or required to provide grounding (earth) for the indoor APs? Appreciate if you can refer me to some documentation. Thanks in advance
We are installing 1260 Access Point (AIR-LAP1262N-E-K9) with 2 sets of external antenna:AIR-ANT2460NP-R (2.4Ghz, Patch Wall-mount, 6dBi Directional) & AIR-ANT5160NP-R (5Ghz, Patch Wall-mount, 6dBi Directional).What would be the recommended separation...
Have recently upgraded 6500 Wism from ver 6.0.196.0 to 7.0.98.0.Upgrade process was successful but noticed that secondary image still is in the previous version (6.0.196.0).I have read that to upgrade it we must use ER Boot release image,but the late...
Hi.We have one customer who have deployed a unified wireless solution using WLC4402. They implemented high security that they have disabled telnet, http & https connectivity to the WLC. Now, configuration changes needs to be done on the WLC but unfor...
Hi Stephen.Thanks for your reply. Still leads me to other questions.What is the difference between ER & BOOT images?(Attached is taken from Cisco Wism Download page)Is it safe to claim that the secondary image (6.0.196.0) is better/stable than it's e...
appreciate the quick response guys. tnx.found some of serial cables but no luck.used ssh using securecrt but is not working.service port? whats the procedure to connect to it?and also i have observed that directly connected device sees the WLC via cd...
