Hi Mates,Am not able to attach a QoS policy attached to an interface GigabitEthernet0/3. and getting the error message.Switch(config)#interface Gi0/3 Switch(config-if)#service-policy input QoS-SILVERQoS: Unsupported L4 protocol type matchQoS: Policy ...
Hi All,we are facing some problems while redistributing the RIP routes into BGP.Scenario is like we are using RIP between My site and client router and we are redistributing some of the routes learned via RIP into the BGP ( we are using BGP to take...
Hi I am using LMS 3.2.1 and cisco view 6.1.9 but when i am seeing in Common services -->Server --> device Update i am able to see number of counts in RME but zero number of counts in Cisco ViewPlease help how to get rid of itRegardsNikhil Srivastava
Hi,My Cisco 6506 switch got rebooted with the message as below:%SPANTREE-5-EXTENDED_SYSID:Configured from memory by consoleSystem restarted...Can any one suggest the root cause. Logs attached.Thanks,
Hello,Am not trying IBGP (IGBP) into IGP. Scenario is just reverse and it is happening for only one subnet 199.67.210.0 and all other are working.To let you have more clear picture, we have added the permit 199.67.210.0/ 24 in ACL 35 for redistributi...
i dont think we can do this as unnecessary flooding of unwanted subnets will happen in our network beacuse of this which we dont want.however we have try by removing the redistributin command and then reapply it but still we didnt get the succuss a...
dear nandi,we have removed it from the ACL because we are not able to redistribut only this subnet in our BGP, we are only able to take it in our bgp table only when we have applied the network command for this particular subnet.
