I know it's not recommended, but this is in a lab environment. I have CUCM connected directly to a SIP trunk provider and outgoing calls work fine. Incoming calls are getting rejected. I have the appropriate translation in place and have verified the...
Hello, I'm looking to reinstall CMBE5000 in my home lab and I cannot find the ISO anywhere. I had the CDs, but I can't find them. If anyone has or knows where I can download the ISO that would be much appreciated. Thank you, Jason
Hello, I need to reinstall the restricted version of CUCM 8.6.2.2 in a lab environment and I no longer have the installation media. Cisco's download section does not have any downloads prior to 9.1. Would anyone happen to still have this iso? Thanks...
Hello,
I have successfully configured a vWLC and I'm using central switching. The VMware interface and the switch interface is configured as a trunk. I have created 2 interfaces on the vWLC in addition to the management one (native vlan 24). The g...
Thank you very much for all the help this far. I decided to bypass the CUBE again and go direct SIP Trunk to CUCM. I configured the ASA to deal with the public IP address NAT issue and I've gotten further, but stuck here. The CUCM reports the phone i...
Thanks. Yes, I have created the SIP profiles below, I believe they are global, but still not working. I'll look at changing the inbound dial peer matching. voice class sip-profiles 1request ANY sip-header Contact modify "10.10.30.11" "50.195.28.117"...
Thanks again. I configured a CUBE router and looks like I may be having a similar issue, except now I'm getting 403 Forbidden. It doesn't seem like it's making it to the CUCM. Here is the log from the CUBE: 002708: Jul 25 2022 12:56:05.520 edt: //-1/...
Thanks for the reply. These logs are from the CM. They include the called and the calling number (6033156508|6037822792@50.195.28.117). The called number is 6037822792 and the extension is 2792. I have a translation pattern that maps 6037822792 to 27...
