06-05-2018 12:17 PM - edited 07-05-2021 08:42 AM
Hello,
I have successfully configured a vWLC and I'm using central switching. The VMware interface and the switch interface is configured as a trunk. I have created 2 interfaces on the vWLC in addition to the management one (native vlan 24). The goal is 3 SSIDs each in their own VLAN (24, 30, 50). VLAN 24 and 50 are working fine each on a different SSID. The issue is VLAN 30. Everything is setup the same as the other VLANs except the SSID is using WEP for security and the others are using WPA2. The devices that need to connect to that SSID only support WEP, so I can't really change that. I've gone over this so many times, my head is spinning. I first thought it may be a DHCP issue, but I gave the devices a static and they still wouldn't communicate.
Thanks.
06-05-2018 05:07 PM
06-06-2018 02:47 PM
Be aware the the support for central switching is limited with the vWLC. Which version of software are you currently using and with which type of APs? In addition, please post the output of the "debug client <MAC>" command when the client tries to associate with the network.
06-07-2018 05:04 AM
Thanks. I actually figured out how to get the devices connected using WPA2 instead of WEP. For some reason, WEP seemed to be the issue. With WPA2, all seems to be working now.
06-07-2018 05:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide